Our vertical glass diffusion cells are classic Franz cells. Standard
orifice diameters are 5mm, 7mm, 9mm, 11.28mm, 15mm, 20mm and 25mm, other
diameters are custom. The word "orifice" as it refers to a Franz Cell is
the area at the top of the receptor chamber that is exposed to the
membrane or device through which transport or permeation is being
studied. Corresponding volumes from 5ml to 20ml are standard and are
listed below. There are minimum volumes, especially for jacketed cells,
please find those in the list below as well. We welcome requests for
custom cells! Clamping is achieved through standard o-ring joints, flat
ground (ground o-ring) joints and flat flange joints. Please note that
for the most popular Franz Cell models we manufacture our own cell
clamps. These clamps are all stainless steel and are much easier to use
than clamps from other suppliers.
Ordering Information - Part numbers are generally made up of
2-character codes separated by hyphens.
- 1st code is cell type: 4G is for a jacketed
cell, 6G is for an unjacketed cell
- 2nd code is joint type:
- 00 is an o-ring joint
- 01 is a flat ground (ground o-ring) joint
- 02 is a flat flange joint
- 03 is a spherical joint generally used for corneal work.
- 3rd code is glass type: 00 is for clear
glass, 01 is for amberized glass
- 4th code is orifice diameter in millimeters, 05
through 25
- 5th code is receptor volume in ml, 03
through 20
- 6th code is optional and indicates:
- VD is for a volatile donor compartment with ground glass
joint and Teflon stopper
- VDFT is for a flow through volatile donor compartment with
ground glass joint and Teflon stopper
- VDOC is for an completely occluded volatile donor
compartment
- VDOF is for flow thru volatile donor compartment without
ground glass joint and Teflon stopper
- 7th code only follows the 6th VD or VDFT
codes if a stoppered donor is required:
- 0725 is for a 7/25 ground glass joint with teflon stopper
- 1420 is for a 14/20 ground glass joint with teflon stopper
- FL is for a female luer joint with stopper
Examples
- #4G-01-00-09-05 describes a 9mm jacketed cell with
a flat ground (ground o-ring) joint and clear glass with a 5ml receptor volume.
This is the most common variety of Franz Cell made and is shown in the upper righthand drawing.
- #6G-02-00-09-05 describes a 9mm unjacketed cell
with a flat flange joint and clear glass with a 5ml receptor volume which is shown in
the lower righthand drawing.
- #4G-03-00-0918-10 describes a 9mm jacketed cell
with a 18mm diameter spherical joint and clear glass with a 10ml receptor
volume.
- #4G-01-00-11.28-08-VDFT-0725 describes a 11.28mm
jacketed cell with a flat ground (ground o-ring) joint and clear glass with a 8ml
receptor volume and volatile donor compartment that has flow porting and a 7/25 Teflon stopper.
- #4G-01-00-20-15-VDFT-1420 describes a 20mm jacketed
cell with a flat ground (ground o-ring) joint and clear glass with a 15ml
receptor
volume and volatile donor compartment that has flow porting and a 14/20 Teflon stopper.
|
Typical Dimensions
These dimensions are for standard Franz cells, the joints variety
does not affect the volume. We can modify most any of these parameters
within the practical limits of blown glass. Do not hesitate to inquire
if your studies need something other than what is listed here. The
term "cell" for sales and pricing purposes includes the two glass
components, the clamp for the joint, and the stirbar.
|